- 5000 m Phase 1 drilling program set to commence at Alexo North and South Deposits to expand current Mineral Resources
- Initial 25 drill holes designed to define the mineralized trends at Alexo South and Alexo North
- Approvals in place, drill rig operator hired, on-site technical team secured
- First part of 10,000 m Phase 1 program planned for the Alexo-Dundonald Project
- Company well funded to complete the Phase 1 program with existing treasury
TORONTO, March 22, 2021 — Class 1 Nickel and Technologies Ltd. (CSE: NICO/OTCQB: NICLF) (“Class 1 Nickel” or the “Company”) is pleased to announce that all necessary approvals have been granted and all contractors secured in order to commence a Phase 1 drill program in April 2021 at Alexo Dundonald Nickel-Copper-Cobalt Project ( “Alexo-Dundonald Project” ), located near Timmins, Ontario (Canada).
The Alexo-Dundonald Project contains four NI 43-101 Mineral Resources situated on the near-continuous folded komatiite-ultramafic unit that can be traced on the Property for at least 14 km. All the Mineral Resources are open at depth and along strike.
Class 1 Nickel has over C$3M in its treasury, and therefore is well funded to complete its Phase 1 exploration program. The Company is about to mobilize the first of two diamond drill rigs to its Alexo-Dundonald Project.
The Company’s principal objective for the exploration program is to lay the groundwork for expansion of the current Mineral Resource Estimates of the Alexo North and Alexo South, by defining the trends of mineralization along strike and down-dip/down-plunge from the known Deposits.
The Company’s primary focus is on building more tonnage at Alexo, where previous production has taken place and where future production is likely to take place first. The rigs will then be moved west and drill to expand the high-grade Dundonald South and Dundonald North Mineral Resources along strike and at depth.
The drill program has been designed by veteran nickel expert Dr. William Stone, who along with Chief Geophysicist Mr. Allan King, has analyzed, modelled and interpreted the large historical exploration database for the Alexo-Dundonald Project. A total of 103,000 m of drilling in 590 holes has been completed to date at the Alexo Dundonald Project. Roughly a hundred of the drill holes have been surveyed for off-hole electromagnetic responses.
Drill Program Plan for Alexo South
The Phase 1 program at Alexo South includes drilling 16 diamond holes for a total of 3270 metres (Figure 2). Many more than 16 holes were planned; however, only those corresponding to the presence of BHEM conductive plates interpreted from historical survey data, favourable nickel assay trends, target depths of <200 metres, and piece point locations outside of the current Mineral Resource Estimate were prioritized for drilling in Phase 1. The remainder of the planned holes will be drilled in Phase 2 (Fall 2021).
As part of the Phase 1 program, three holes are planned to test for the presence of conductive shoots below the centre of the known Alexo South Deposit, three more holes are planned to test conductor plate models at the eastern end, and ten holes are planned to test conductor plate models below and at the western end of the known deposit. Approximately 50% of the drill holes will be surveyed for off-hole electromagnetic conductors that could be massive or semi-massive nickel sulphide shoots.
FIGURE 2. Plan map of drill holes designed for the Alexo South Deposit Area
Note that this image is a 2-D rendition of a 3-D spatial model
Drill Program Plan for Alexo North
The Phase 1 program at Alexo North includes drilling nine (9) diamond holes for a total of 1620 metres (Figure 3). Many more holes were planned; however, only those corresponding to the presence of VTEM conductive plates, nickel assay grade trends, target depths of <200 metres, and piece point locations outside of the current Mineral Resource Estimate were prioritized for drilling in Phase 1. Historically, surprisingly little effective BHEM survey work was completed at Alexo North. The remainder of the planned holes are earmarked for drilling in Phase 2 (Fall 2021).
In Phase 1, one hole is planned to test for the presence of mineralized below the centre of the known Alexo North Deposit, two more holes are planned to test for extensions of the eastern end, and six holes are planned to test for extensions of the western end of the known Deposit. Again, approximately 50% of the drill holes will be surveyed for off-hole electromagnetic conductors that could be massive or semi-massive nickel sulphide shoots.
FIGURE 3. Plan map of drill holes planned for Alexo North Deposit
Note that this image is a 2-D rendition of a 3-D spatial model
Drill Program for Dundonald North and Dundonald South
Hole planning is underway for the Phase 1 drill program at Dundonald. As per Alexo, hole design at Dundonald is guided by the presence of interpreted VTEM conductor plates from the fall 2020 airborne survey and interpreted BHEM conductor plates from many historical surveys. The completed drill plan will be announced in the coming weeks.
The Company’s board and management team are confident that the upcoming drill programs will result in the delineation of additional Mineral Resources, which can be subject to a Preliminary Economic Assessment of the potential for a direct shipping operation.
The technical information in this news release has been reviewed and approved by Dr. William Stone (P.Geo.), independent geological consultant to the Company, who is a Qualified Person under the definitions established by National Instrument 43‐101.
About Class 1 Nickel
Class 1 Nickel and Technologies Limited (CSE: NICO/OTCQB: NICLF) is a Mineral Resource Company focused on the development of its 100% owned Alexo-Dundonald Project, a portfolio of komatiite hosted magmatic nickel-copper-cobalt sulphide Mineral Resources located near Timmins, Ontario. The Company also owns the Somanike komatiite hosted nickel-copper sulphide project in Quebec, which includes the famous historical Marbridge Mine.
For more information, please contact:
Mr. David Fitch, President & CEO
E: [email protected]
Neither the Canadian Securities Exchange nor its regulation services provider has reviewed or accepted responsibility for the adequacy or accuracy of this press release.
This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as “plan”, “expect”, “project”, “intend”, “believe”, “anticipate”, “estimate” and other similar words, or statements that certain events or conditions “may” or “will” occur. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, and other risks involved in the mineral exploration and development industry, including those risks set out in the Company’s management’s discussion and analysis as filed under the Company’s profile at www.sedar.com . Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including that all necessary governmental and regulatory approvals will be received as and when expected. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information. The Company disclaims any intention or obligation to update or revise any forward-looking information, other than as required by applicable securities laws.